1. Choose material
A total of 11 materials made of metals and plastics can be printed with the PrintoLUX® process. You can find more information about our material properties in our download area:
2. Pre-treatment
All materials are treated with a primer before printing. This promotes the bonding of ink and material during the following thermosetting.
3. Printing
The flexibility of digital printing gives you extensive possibilities to design the label layout. Design texts, colours, photos, graphics, barcodes and 2D codes (e.g. QR and Datamatrix) according to your personal needs.
4. Thermosetting
All materials are thermoset after printing. After this step, the label already acquires its full resistance and can be mounted immediately.
-
PrintoLUX® Signo
Perfect for the production of small and large series suitable for stationary use with little space requirement.
-
PrintoLUX®-FB-140/3000-plus
The labelling system for extensive series production.
PrintoLUX® Signo
The latest generation of PrintoLUX® labelling systems offers a print area of 204 × 291 mm (borderless) and prints on material up to a thickness of max. 7.0 mm.
Thanks to its compact design, the system is ideal for use in offices or workshops where space is at a premium.
More information about the advantages and features of the PrintoLUX Signo can be found on the landing page.
With PrintoLUX®, your own short-term labelling needs can be produced just in time. In total, the following 11 materials can be printed with the PrintoLUX® process:
- Aluminium, silver (AE)
- Aluminium, white (ASE)
- Stainless steel (VE)
- Brass (ME)
- Aluminium composite material (AV)
- Polyamide (PA)
- Polyester decorative foil (PD)
- Polyester adhesive foil (PK)
- Polyester foil (PY)
- Laminate material (SP)
- Document adhesive foil (DK)
The ink system is managed by a total of 4 cartridges. Like all PrintoLUX® labelling systems, only environmentally friendly, water-based inks are used. No hazardous waste is generated during production with PrintoLUX®.
For the initial equipment of our customers, we deliver the PrintoLUX® labelling system with all additionally required components such as software, consumables and heating unit. In addition, instruction on the handling and operation of the process takes place in form of user training.
As an alternative to purchasing the system, we also offer leasing financing. We will be happy to provide you with detailed information.
You can find a comparison of our system variants here.
We will be happy to answer any further questions you may have on the subject of PrintoLUX® labelling in a meeting without obligation.
PrintoLUX®-FB-140/3000-plus
The flatbed system offers a print area of 300 x 500 mm and prints on material up to a thickness of 140 mm. This makes it suitable for printing on enclosures and front panels. The height adjustment adjusts fully automatically to the respective material thickness.
With PrintoLUX®, your own short-term labelling needs can be produced just in time. The generous print area is ideal for extensive series production. In total, the following 11 materials can be printed with the PrintoLUX® process:
- Aluminium, silver (AE)
- Aluminium, white (ASE)
- Stainless steel (VE)
- Brass (ME)
- Aluminium composite material (AV)
- Polyamide (PA)
- Polyester decorative foil (PD)
- Polyester adhesive foil (PK)
- Polyester foil (PY)
- Laminate material (SP)
- Document adhesive foil (DK)
The ink system is managed by a total of 9 cartridges. Like all PrintoLUX® labelling systems, only environmentally friendly, water-based inks are used. No hazardous waste is generated during production with PrintoLUX®.
For the initial equipment of our customers, we deliver the PrintoLUX® labelling system with all additionally required components such as software, consumables and heating unit. In addition, instruction on the handling and operation of the process takes place in form of user training.
As an alternative to purchasing the system, we also offer leasing financing. We will be happy to provide you with detailed information.
You can find a comparison of our system variants here.
We will be happy to answer any further questions you may have on the subject of PrintoLUX® labelling in a meeting without obligation.
We use laser engraving and the PrintoLUX® process for the production of labels in parallel. When it comes to high quality typeface and good representation of the smallest typography, we experience the process as highly superior.
Michael Gaber, Trench GmbH
With the PrintoLUX® process, we have significantly improved our project business at an important point: When labels need to be corrected during project transfers, we can do this without any delay.
Andreas Schmücker, ROSS EUROPA GmbH
As an internationally active machine manufacturer, we also produce labels with Chinese lettering. This is much faster with the PrintoLUX® process than with engraving.
Jürgen Schätzle, Supfina Grieshaber GmbH & Co. KG